SolarEdge single-phase and three-phase inverters (Europe & APAC)
SolarEdge 2x1A: Faulty AC relay
Quick answerSolarEdge 2x1A means The inverter's AC relay failed its check. The addendum lists this as Faulty AC Relay with no field procedure and directs you to contact SolarEdge support..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
The inverter's AC relay failed its check. The addendum lists this as Faulty AC Relay with no field procedure and directs you to contact SolarEdge support.
Likely causes
- AC relay welded, stuck or open
- Relay driver circuit fault on the control board
What to check
- Note the code and serial number
- Contact SolarEdge support; the relay is inside the inverter enclosure
Parts implicated
AC relay
Sources (verbatim):
- https://web.archive.org/web/20230202122919/https://knowledge-center.solaredge.com/sites/kc/files/se-inverter-installation-guide-error-codes.pdf (manual, retrieved 2026-11-21) p. 3
“Faulty AC Relay Contact SolarEdge support.”
Paraphrased; verify against the manual for your exact model and serial number.