Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
SolarEdge single-phase and three-phase inverters (Europe & APAC)

SolarEdge 2x23: AC frequency too low (line 1/2/3)

confidence: verifiedchecked 2026-11-21
Quick answerSolarEdge 2x23 means The inverter measured an AC grid frequency below the lower limit of the selected country grid code and disconnected. The addendum lists the message without a field repair; investigate the grid supply and the country setting..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

The inverter measured an AC grid frequency below the lower limit of the selected country grid code and disconnected. The addendum lists the message without a field repair; investigate the grid supply and the country setting.

Likely causes

  • Grid frequency excursion below the country limit
  • Wrong country/grid-code setting
  • Weak or islanded grid supply

What to check

  1. Confirm the country/grid-code setting
  2. Consult the grid operator about the frequency event
  3. Check for a local generator or islanding condition

Parts implicated

AC wiring
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.