SolarEdge single-phase and three-phase inverters (Europe & APAC)
SolarEdge 2x24: DC injection (line 1/2/3)
Quick answerSolarEdge 2x24 means The inverter detected DC current injected into the AC output on one of the lines, which indicates a problem in the inverter's output stage. The addendum has no field remedy and directs you to contact SolarEdge support..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
The inverter detected DC current injected into the AC output on one of the lines, which indicates a problem in the inverter's output stage. The addendum has no field remedy and directs you to contact SolarEdge support.
Likely causes
- Output-stage (H-bridge) fault in the inverter
- Current-sensor or control-loop fault
What to check
- Note the code and serial number
- Contact SolarEdge support; do not keep the inverter connected to the grid
Parts implicated
inverter
Sources (verbatim):
- https://web.archive.org/web/20230202122919/https://knowledge-center.solaredge.com/sites/kc/files/se-inverter-installation-guide-error-codes.pdf (manual, retrieved 2026-11-21) p. 3
“DC Injection (Line 1/2/3) Contact SolarEdge support.”
Paraphrased; verify against the manual for your exact model and serial number.