SolarEdge single-phase and three-phase inverters (Europe & APAC)
SolarEdge 2x28: Islanding
Quick answerSolarEdge 2x28 means The inverter detected that the AC grid is down and stopped producing (islanding). It restarts automatically after the reconnection time once AC grid voltage returns; if the problem persists, consult the grid operator..
Escalation. If the fix goes beyond a non-invasive check or a software setting, or you are not sure the system is isolated, stop and call a qualified installer.
What it means
The inverter detected that the AC grid is down and stopped producing (islanding). It restarts automatically after the reconnection time once AC grid voltage returns; if the problem persists, consult the grid operator.
Likely causes
- Grid outage or upstream breaker open
- Grid voltage outside the window for the reconnection time
What to check
- Confirm the grid supply is present at the main connection point
- Wait for the reconnection time after the grid returns
- Consult the grid operator if the inverter does not reconnect
Parts implicated
None listed
Sources (verbatim):
- https://web.archive.org/web/20230202122919/https://knowledge-center.solaredge.com/sites/kc/files/se-inverter-installation-guide-error-codes.pdf (manual, retrieved 2026-11-21) p. 4
“Islanding Grid is down. When AC grid voltage returns the inverter will restart after the reconnection time.”
Paraphrased; verify against the manual for your exact model and serial number.