SolarEdge single-phase and three-phase inverters (Europe & APAC)
SolarEdge 3xB: No country selected (three-phase)
Quick answerSolarEdge 3xB means A three-phase inverter has no country/grid code selected (the table lists 3xB for both phase types). Select the country in SetApp so the correct grid limits are applied..
Escalation. If the fix goes beyond a non-invasive check or a software setting, or you are not sure the system is isolated, stop and call a qualified installer.
What it means
A three-phase inverter has no country/grid code selected (the table lists 3xB for both phase types). Select the country in SetApp so the correct grid limits are applied.
Likely causes
- Country not set during commissioning
- Setting cleared after a firmware update or board swap
What to check
- Select the correct country in SetApp
- Re-commission and verify the inverter connects to the grid
Parts implicated
None listed
Sources (verbatim):
- https://web.archive.org/web/20230202122919/https://knowledge-center.solaredge.com/sites/kc/files/se-inverter-installation-guide-error-codes.pdf (manual, retrieved 2026-11-21) p. 4
“No Country Selected Select the country, as described in the Country and Grid section of the installation guide.”
Paraphrased; verify against the manual for your exact model and serial number.