SolarEdge single-phase and three-phase inverters (Europe & APAC)
SolarEdge 8x10: Communication error
Quick answerSolarEdge 8x10 means An internal communication error was detected inside the inverter. The addendum lists the message with the single instruction to contact SolarEdge support..
Escalation. If the fix goes beyond a non-invasive check or a software setting, or you are not sure the system is isolated, stop and call a qualified installer.
What it means
An internal communication error was detected inside the inverter. The addendum lists the message with the single instruction to contact SolarEdge support.
Likely causes
- Internal communication bus fault between controllers
- Control-board fault
What to check
- Note the code and serial number
- Contact SolarEdge support
Parts implicated
control board
Sources (verbatim):
- https://web.archive.org/web/20230202122919/https://knowledge-center.solaredge.com/sites/kc/files/se-inverter-installation-guide-error-codes.pdf (manual, retrieved 2026-11-21) p. 4
“Communication Error Contact SolarEdge support.”
Paraphrased; verify against the manual for your exact model and serial number.