SolarEdge single-phase and three-phase inverters (Europe & APAC)
SolarEdge 8x2B: Ground current / RCD trip (three-phase)
Quick answerSolarEdge 8x2B means A three-phase inverter detected a ground-fault current (codes 8x2B/8x2C/8x39 share this row). The addendum attributes it to insufficient insulation to ground and requires the string-by-string isolation procedure by a qualified technician..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
A three-phase inverter detected a ground-fault current (codes 8x2B/8x2C/8x39 share this row). The addendum attributes it to insufficient insulation to ground and requires the string-by-string isolation procedure by a qualified technician.
Likely causes
- Damaged or degraded module insulation
- Damaged DC string cable or connector
- Moisture creating a leakage path to earth
What to check
- Switch the inverter off, wait five minutes, then disconnect AC and DC
- Reconnect DC strings one at a time until the fault reappears
- Leave the faulty string disconnected for a certified installer to repair
Parts implicated
PV modulesDC cablingRCD
Sources (verbatim):
- https://web.archive.org/web/20230202122919/https://knowledge-center.solaredge.com/sites/kc/files/se-inverter-installation-guide-error-codes.pdf (manual, retrieved 2026-11-21) p. 2
“Ground Current - RCD Ground faults may occur due to insufficient insulation to the ground.”
Paraphrased; verify against the manual for your exact model and serial number.