Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
SolarEdge single-phase and three-phase inverters (Europe & APAC)

SolarEdge 8x3A: AC over-current (line 1/2/3)

confidence: verifiedchecked 2026-11-21
Quick answerSolarEdge 8x3A means The AC output current exceeded the inverter's limit on one of the lines (codes 8x3A/8x3B/8x3C and 8x3F/8x40/8x41). The addendum has no field repair and directs you to contact SolarEdge support..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

The AC output current exceeded the inverter's limit on one of the lines (codes 8x3A/8x3B/8x3C and 8x3F/8x40/8x41). The addendum has no field repair and directs you to contact SolarEdge support.

Likely causes

  • Output over-current or a fault in the output stage
  • Current-sensor or control-loop fault

What to check

  1. Note the code and serial number
  2. Contact SolarEdge support

Parts implicated

inverter
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.