SolarEdge single-phase and three-phase inverters (Europe & APAC)
SolarEdge 8x45: UDC max (DC input over-voltage)
Quick answerSolarEdge 8x45 means The DC input voltage (UDC) exceeded the inverter's maximum. The addendum has no field repair and directs you to contact SolarEdge Support..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
The DC input voltage (UDC) exceeded the inverter's maximum. The addendum has no field repair and directs you to contact SolarEdge Support.
Likely causes
- PV string voltage above the inverter's maximum DC input
- Power optimizer failure or string misconfiguration
What to check
- Record the DC voltage reading on the status screen
- Contact SolarEdge support before changing string wiring
Parts implicated
PV stringspower optimizers
Sources (verbatim):
- https://web.archive.org/web/20230202122919/https://knowledge-center.solaredge.com/sites/kc/files/se-inverter-installation-guide-error-codes.pdf (manual, retrieved 2026-11-21) p. 5
“UDC Max Contact SolarEdge support.”
Paraphrased; verify against the manual for your exact model and serial number.