Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
SolarEdge single-phase and three-phase inverters (Europe & APAC)

SolarEdge 8x46: UDC min (DC input under-voltage)

confidence: verifiedchecked 2026-11-21
Quick answerSolarEdge 8x46 means The DC input voltage (UDC) fell below the inverter's minimum, so it cannot operate. The addendum has no field repair and directs you to contact SolarEdge support..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

The DC input voltage (UDC) fell below the inverter's minimum, so it cannot operate. The addendum has no field repair and directs you to contact SolarEdge support.

Likely causes

  • String voltage below the inverter's minimum
  • Optimizer or string wiring fault
  • Low irradiance or a disconnected string

What to check

  1. Check the DC voltage and string count on the status screen
  2. Confirm all strings are connected and producing
  3. Contact SolarEdge support if the voltage is low in full sun

Parts implicated

PV stringspower optimizers
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.