SolarEdge single-phase and three-phase inverters (Europe & APAC)
SolarEdge 8xB8: Pairing error
Quick answerSolarEdge 8xB8 means The inverter reports a Pairing Error, meaning it could not pair with its Power Optimizers during commissioning. The addendum's instruction is to contact support..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
The inverter reports a Pairing Error, meaning it could not pair with its Power Optimizers during commissioning. The addendum's instruction is to contact support.
Likely causes
- Power Optimizers not paired or paired to another inverter
- Optimizer or string wiring fault during commissioning
What to check
- Note the code, serial number and optimizer serials
- Contact SolarEdge support before re-pairing
Parts implicated
power optimizers
Sources (verbatim):
- https://web.archive.org/web/20230202122919/https://knowledge-center.solaredge.com/sites/kc/files/se-inverter-installation-guide-error-codes.pdf (manual, retrieved 2026-11-21) p. 6
“Pairing Error Contact support.”
Paraphrased; verify against the manual for your exact model and serial number.