Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Victron Err 114: CPU temperature too high
Quick answerVictron Err 114 means The charger CPU is too hot; the error resets after the CPU cools. Persistent error suggests a faulty controller..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
The charger CPU is too hot; the error resets after the CPU cools. Persistent error suggests a faulty controller.
Likely causes
- High ambient temperature
- Obstructed air inlet/outlet
- Poor mounting with insufficient cooling
What to check
- Check ambient temperature and clear obstructions near air inlets/outlets
- Check the manual's mounting requirements for cooling
- Replace the controller if it persists
Parts implicated
cooling
Sources (verbatim):
- https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 114 - CPU temperature too high
“This error will reset after the CPU has cooled down.”
Paraphrased; verify against the manual for your exact model and serial number.