Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Victron Err 116: Calibration data lost
Quick answerVictron Err 116 means The unit's calibration data is missing or lost. If it is the active error the unit is faulty; if only in history while the unit works normally it can be ignored..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
The unit's calibration data is missing or lost. If it is the active error the unit is faulty; if only in history while the unit works normally it can be ignored.
Likely causes
- Faulty unit
- Reverting SmartSolar firmware from v1.4x to older firmware
- Factory first-boot history entry
What to check
- If active and the unit is not working, contact the dealer for replacement
- If only in history and the unit works, ignore safely
- Re-install v1.4x firmware after an attempted downgrade
Parts implicated
charge controller
Sources (verbatim):
- https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 116 - Calibration data lost
“If the unit does not work and error 116 pops up as the active error the unit is faulty, contact your dealer for a replacement.”
Paraphrased; verify against the manual for your exact model and serial number.