Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Victron Err 117: Incompatible firmware
Quick answerVictron Err 117 means A firmware update did not complete, leaving the device only partially updated..
Escalation. If the fix goes beyond a non-invasive check or a software setting, or you are not sure the system is isolated, stop and call a qualified installer.
What it means
A firmware update did not complete, leaving the device only partially updated.
Likely causes
- Interrupted over-the-air update
- Cable disconnected or power lost during update
- Device out of range during update
What to check
- Retry the firmware update with the correct firmware file for the device
Parts implicated
firmware
Sources (verbatim):
- https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 117 - Incompatible firmware
“This error indicates that a firmware update did not complete, so the device is only partially updated.”
Paraphrased; verify against the manual for your exact model and serial number.