Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Victron Err 119: Settings data lost
Quick answerVictron Err 119 means The charger cannot read its configuration and has stopped. It does not auto-reset; restore defaults and reconfigure..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
The charger cannot read its configuration and has stopped. It does not auto-reset; restore defaults and reconfigure.
Likely causes
- Corrupted configuration data
What to check
- Restore factory defaults in VictronConnect
- Isolate all power, wait 3 minutes, repower, then reconfigure
- Report the event to the dealer
Parts implicated
charge controller
Sources (verbatim):
- https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 119 - Settings data lost
“The charger cannot read its configuration, and stopped.”
Paraphrased; verify against the manual for your exact model and serial number.