Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Victron Err 121: Tester fail
Quick answerVictron Err 121 means A factory self-test fault. If it is the active error the unit is faulty; if only in history while the unit works normally it can be ignored..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
A factory self-test fault. If it is the active error the unit is faulty; if only in history while the unit works normally it can be ignored.
Likely causes
- Faulty unit
- Factory first-boot history entry
What to check
- If active and not working, contact the dealer for replacement
- If only in history and working, ignore safely
Parts implicated
charge controller
Sources (verbatim):
- https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 121 - Tester fail
“If the unit does not work and error 121 pops up as the active error the unit is faulty, contact your dealer for a replacement.”
Paraphrased; verify against the manual for your exact model and serial number.