Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Victron Err 200: Internal DC voltage error
Quick answerVictron Err 200 means An internal DC-DC converter diagnostic failed. It does not auto-reset; persistent failure indicates a faulty unit..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
An internal DC-DC converter diagnostic failed. It does not auto-reset; persistent failure indicates a faulty unit.
Likely causes
- Faulty internal DC-DC converter
What to check
- Restart the unit with the power switch
- Replace the unit if the error persists
Parts implicated
DC-DC converter
Sources (verbatim):
- https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 200 - Internal DC voltage error
“The unit performs internal diagnostics when activating its internal DC-DC converter.”
Paraphrased; verify against the manual for your exact model and serial number.