Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Victron Err 201: Internal DC voltage measurement error
Quick answerVictron Err 201 means An internal (high-)voltage measurement did not match criteria. On MPPT RS/Inverter RS/Multi RS, update firmware first — limits were too strict in older versions and could trigger falsely at MPPT start/stop..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
An internal (high-)voltage measurement did not match criteria. On MPPT RS/Inverter RS/Multi RS, update firmware first — limits were too strict in older versions and could trigger falsely at MPPT start/stop.
Likely causes
- Firmware older than v1.08 (false triggers)
- Broken internal measurement circuit
What to check
- Update firmware to v1.08 or newer
- Restart with the power switch
- Send for repair if it persists
Parts implicated
measurement circuit
Sources (verbatim):
- https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 201 - Internal DC voltage error
“Applies to the MPPT RS, Inverter RS and Multi RS.”
Paraphrased; verify against the manual for your exact model and serial number.