Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Victron Err 202: Internal GFCI sensor error
Quick answerVictron Err 202 means The residual-current (GFCI) sensor failed its internal self-test. It does not auto-reset; persistent failure requires repair/replacement..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
The residual-current (GFCI) sensor failed its internal self-test. It does not auto-reset; persistent failure requires repair/replacement.
Likely causes
- Faulty GFCI sensor
What to check
- Restart the unit with the power switch
- Send for repair/replacement if it persists
Parts implicated
GFCI sensor
Sources (verbatim):
- https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 202 - Internal GFCI sensor error
“The sensor used to measure residual current did not pass the internal self test.”
Paraphrased; verify against the manual for your exact model and serial number.