Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

Victron Err 21: Current sensor issue

confidence: verifiedchecked 2026-11-21
Quick answerVictron Err 21 means The internal current measurement is out of range. It does not auto-reset; if it persists after a full power-cycle the unit likely has a hardware defect..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

The internal current measurement is out of range. It does not auto-reset; if it persists after a full power-cycle the unit likely has a hardware defect.

Likely causes

  • Hardware defect in the current sensing circuit
  • Bypassed PV-/Battery- minus path

What to check

  1. Disconnect all wiring and reconnect to restart
  2. Confirm the PV-/Battery- minus is not bypassing the controller
  3. Contact the dealer if it persists

Parts implicated

current sensorcharge controller
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.