Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

Victron Err 26: Terminal overheated

confidence: verifiedchecked 2026-11-21
Quick answerVictron Err 26 means The power terminals have overheated; the error auto-resets after cooling. Usually a wiring issue at the terminals..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

The power terminals have overheated; the error auto-resets after cooling. Usually a wiring issue at the terminals.

Likely causes

  • Undersized or wrong-type wiring
  • Loose terminal bolts

What to check

  1. Check wiring type and strand size against the manual
  2. Tighten terminal bolts (isolated) and confirm the error clears

Parts implicated

power terminalswiring
Sources (verbatim):
  • https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 26 - Terminal overheated
    “Power terminals overheated, check wiring, including the wiring type and type of strands, and/or fasten bolts if possible. This error will auto-reset.”

Paraphrased; verify against the manual for your exact model and serial number.