Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Victron Err 27: Charger short circuit
Quick answerVictron Err 27 means An over-current condition on the battery side, for example when a battery is attached via a contactor or the charger starts into an inverter with large input capacitance. It auto-resets; persistent failure suggests a faulty controller..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
An over-current condition on the battery side, for example when a battery is attached via a contactor or the charger starts into an inverter with large input capacitance. It auto-resets; persistent failure suggests a faulty controller.
Likely causes
- Battery connected through a contactor
- Charger starting without battery into a high-capacitance inverter
- Faulty controller
What to check
- Let it auto-reset; if it does not, isolate all power, wait 3 minutes, repower
- Contact the dealer if it persists
Parts implicated
charge controller
Sources (verbatim):
- https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 27 - Charger short circuit
“This condition indicates an over-current condition on the battery side.”
Paraphrased; verify against the manual for your exact model and serial number.