Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Victron Err 28: Power stage issue
Quick answerVictron Err 28 means A power-stage fault that does not auto-reset. The unit must be replaced if the error persists after a full power-cycle..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
A power-stage fault that does not auto-reset. The unit must be replaced if the error persists after a full power-cycle.
Likely causes
- Faulty power stage
What to check
- Disconnect all wiring and reconnect to restart
- Replace the unit if the error persists
Parts implicated
power stage
Sources (verbatim):
- https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 28 - Power stage issue
“This error will not auto-reset.”
Paraphrased; verify against the manual for your exact model and serial number.