Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

Victron Err 3: Remote temperature sensor failure

confidence: verifiedchecked 2026-11-21
Quick answerVictron Err 3 means The remote temperature sensor reading is invalid, usually because the T-sense connector is wired to the battery terminal instead of a temperature sensor..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

The remote temperature sensor reading is invalid, usually because the T-sense connector is wired to the battery terminal instead of a temperature sensor.

Likely causes

  • T-sense connector connected to BAT+ or BAT- instead of a temperature sensor
  • Faulty sensor or wiring

What to check

  1. Check the T-sense connector is on a temperature sensor, not a battery terminal
  2. Reconnect correctly and confirm the error clears

Parts implicated

temperature sensor
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.