Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

Victron Err 33: PV over-voltage

confidence: verifiedchecked 2026-11-21
Quick answerVictron Err 33 means The PV open-circuit voltage is critical for this charger (too high for its rating); the error resets once PV voltage drops to a safe level..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

The PV open-circuit voltage is critical for this charger (too high for its rating); the error resets once PV voltage drops to a safe level.

Likely causes

  • PV array open-circuit voltage too high for the charger
  • Too many panels in series

What to check

  1. Check the PV array configuration against the charger's max PV voltage
  2. Re-organise panels (fewer in series) if required

Parts implicated

PV array
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.