Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

Victron Err 34: PV over-current

confidence: verifiedchecked 2026-11-21
Quick answerVictron Err 34 means The solar array current exceeded the rated input current, or an internal fault occurred. Persistent failure after a power-cycle suggests a faulty controller..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

The solar array current exceeded the rated input current, or an internal fault occurred. Persistent failure after a power-cycle suggests a faulty controller.

Likely causes

  • PV array current above rating
  • Internal system fault

What to check

  1. Isolate all power, wait 3 minutes, repower
  2. Contact the dealer if it persists

Parts implicated

charge controllerPV array
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.