Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Victron Err 40: PV input failed to shutdown
Quick answerVictron Err 40 means The charger could not turn off the PV input, so it entered a safe mode: charging stops and the output disconnects. The charger is then faulty..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
The charger could not turn off the PV input, so it entered a safe mode: charging stops and the output disconnects. The charger is then faulty.
Likely causes
- Faulty PV input shutdown stage
What to check
- Replace the charge controller
Parts implicated
charge controller
Sources (verbatim):
- https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 40 - PV Input failed to shutdown
“If the charger is unable to turn off the PV input, it will go into a safe mode in order to protect the battery from over-charging or having a high voltage on the battery terminals.”
Paraphrased; verify against the manual for your exact model and serial number.