Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Victron Err 41: PV isolation failure
Quick answerVictron Err 41 means The PV array's isolation resistance is too low. On inverters the unit restarts once resolved; solar chargers remain operational but keep the warning until cleared..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
The PV array's isolation resistance is too low. On inverters the unit restarts once resolved; solar chargers remain operational but keep the warning until cleared.
Likely causes
- Damaged PV cabling or connectors
- Panel insulation fault
- Moisture ingress
What to check
- Check PV array cabling and panel isolation
- On inverters, disconnect the PV array with the PV switch to resume AC operation
Parts implicated
PV cablingpanels
Sources (verbatim):
- https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 41 - PV isolation failure
“PV panel isolation resistance too low.”
Paraphrased; verify against the manual for your exact model and serial number.