Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Victron Err 5: Remote temperature sensor failure (connection lost)
Quick answerVictron Err 5 means The charger has lost connection to the remote temperature sensor it was previously reading..
Escalation. If the fix goes beyond a non-invasive check or a software setting, or you are not sure the system is isolated, stop and call a qualified installer.
What it means
The charger has lost connection to the remote temperature sensor it was previously reading.
Likely causes
- Loose or disconnected T-sense wiring
- Failed temperature sensor
What to check
- Check the T-sense connector and cable
- Reconnect and confirm the reading returns in VictronConnect
Parts implicated
temperature sensor
Sources (verbatim):
- https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 5 - Remote temperature sensor failure (connection lost)
“Check if the T-sense connector is properly connected to a remote temperature sensor. This error will not auto-reset.”
Paraphrased; verify against the manual for your exact model and serial number.