Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

Victron Err 50: Inverter overload / peak current

confidence: verifiedchecked 2026-11-21
Quick answerVictron Err 50 means The inverter shut down because the load's inrush or steady current exceeded the over-current trip level. After three restarts with another overload it stays off until manually restarted..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

The inverter shut down because the load's inrush or steady current exceeded the over-current trip level. After three restarts with another overload it stays off until manually restarted.

Likely causes

  • Motor or pump inrush current exceeding the trip level
  • Excessive AC load

What to check

  1. Reduce the AC load (switch off or disconnect appliances)
  2. Restart the inverter if it locked out

Parts implicated

AC loads
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.