Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Victron Err 57: Inverter AC voltage on output
Quick answerVictron Err 57 means There is already AC voltage on the AC-out terminal before the inverter switches on, e.g. AC-out is connected to a mains outlet or another inverter. It does not auto-reset..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
There is already AC voltage on the AC-out terminal before the inverter switches on, e.g. AC-out is connected to a mains outlet or another inverter. It does not auto-reset.
Likely causes
- AC-out connected to mains or another inverter
What to check
- Check the AC-out is not connected to a mains outlet or another inverter
- Correct the installation and restart with the power switch
Parts implicated
AC-out wiring
Sources (verbatim):
- https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 57 - Inverter ac voltage on output
“There is already AC voltage on the AC out terminal before switching on the inverter.”
Paraphrased; verify against the manual for your exact model and serial number.