Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

Victron Err 59: ACIN1 relay test fault

confidence: verifiedchecked 2026-11-21
Quick answerVictron Err 59 means The automatic check of the AC input disconnect relay failed, usually a broken (sticky) relay in the AC input stage..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

The automatic check of the AC input disconnect relay failed, usually a broken (sticky) relay in the AC input stage.

Likely causes

  • Broken/sticky AC input relay

What to check

  1. Contact the dealer for repair or replacement

Parts implicated

AC input relay
Sources (verbatim):
  • https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 59 - ACIN1 relay test fault
    “Automatic checking of the disconnect means failure. This usually indicates a broken relay (sticky contact) in the AC input stage.”

Paraphrased; verify against the manual for your exact model and serial number.