Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

Victron Err 6: Remote battery voltage sense failure

confidence: verifiedchecked 2026-11-21
Quick answerVictron Err 6 means The remote battery voltage sense input is invalid, most commonly because the V-sense connector is wired in reverse polarity..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

The remote battery voltage sense input is invalid, most commonly because the V-sense connector is wired in reverse polarity.

Likely causes

  • V-sense connector wired with reversed polarity
  • Faulty sense wiring

What to check

  1. Check the V-sense connector polarity against the battery terminals
  2. Reconnect and confirm the reading

Parts implicated

voltage sense wiring
Sources (verbatim):
  • https://www.victronenergy.com/live/mppt-error-codes (vendor_kb, retrieved 2026-11-21) § Err 6, Err 7 - Remote battery voltage sense failure
    “Check if the V-sense connector is properly connected to the battery terminals. Most likely cause: the remote V-sense connector is connected in reverse polarity to the BAT+ or BAT- terminals.”

Paraphrased; verify against the manual for your exact model and serial number.