Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC

Victron Err 69: Network misconfigured (phase/frequency)

confidence: vendorchecked 2026-11-21
Quick answerVictron Err 69 means Units on the same CAN bus have different system configurations (single/three-phase or 50/60 Hz). Units stay off until the configuration is fixed..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

Units on the same CAN bus have different system configurations (single/three-phase or 50/60 Hz). Units stay off until the configuration is fixed.

Likely causes

  • Mismatched single/three-phase setting
  • Mismatched 50/60 Hz setting

What to check

  1. Set all units to the same phase configuration and frequency

Parts implicated

None listed
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.