Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
Victron MultiPlus / Quattro / MultiPlus-II / EasySolar-II (VE.Bus inverter/charger)

Victron VE.Bus Error 1: Device switched off because another phase switched off

confidence: verifiedchecked 2026-11-21
Quick answerVictron VE.Bus Error 1 means In a multi-phase system one phase has failed (commonly low battery, overload, or high temperature), so the other phases report Error 1 and switch off..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

In a multi-phase system one phase has failed (commonly low battery, overload, or high temperature), so the other phases report Error 1 and switch off.

Likely causes

  • Low battery, overload, or high temperature on one phase

What to check

  1. Find the failing phase (the one NOT showing Error 1) and read its LEDs for overload / low battery / temperature
  2. Check the alarm log on the GX device or VRM while the fault is present

Parts implicated

batteryAC loads
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.