Victron MultiPlus / Quattro / MultiPlus-II / EasySolar-II (VE.Bus inverter/charger)
Victron VE.Bus Error 10: System time synchronisation problem
Quick answerVictron VE.Bus Error 10 means A time synchronisation problem, typically transient during system restart; often follows Error 1..
Escalation. If the fix goes beyond a non-invasive check or a software setting, or you are not sure the system is isolated, stop and call a qualified installer.
What it means
A time synchronisation problem, typically transient during system restart; often follows Error 1.
Likely causes
- Transient during restart
- Blown DC fuse on one or more units (mains fails)
What to check
- Ignore if only seen during restart
- Check DC fuses on all units
Parts implicated
DC fuse
Sources (verbatim):
- https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes (vendor_kb, retrieved 2026-11-21) § Error 10 - System time synchronisation problem
“This typically happens during a system restart, and is then not a real error; no need to investigate.”
Paraphrased; verify against the manual for your exact model and serial number.