Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
Victron MultiPlus / Quattro / MultiPlus-II / EasySolar-II (VE.Bus inverter/charger)

Victron VE.Bus Error 128: Connect prevented by failing relay test

confidence: verifiedchecked 2026-11-21
Quick answerVictron VE.Bus Error 128 means On a Quattro-II with a grid code selected, the backfeed relay test kept failing for more than 5 minutes, so it cannot connect to the grid..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

On a Quattro-II with a grid code selected, the backfeed relay test kept failing for more than 5 minutes, so it cannot connect to the grid.

Likely causes

  • Repeatedly failing backfeed relay test

What to check

  1. Check the installation wiring and earthing per the grid code
  2. Contact the dealer if the relay test keeps failing

Parts implicated

backfeed relay
Sources (verbatim):
  • https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes (vendor_kb, retrieved 2026-11-21) § Error 128 - Connect prevented by failing relay test
    “Relay test that keeps failing for more than 5 minutes, If a grid code is selected in VEConfigure, on a Quattro-II the backfeed relays are tested every time before connecting to the mains.”

Paraphrased; verify against the manual for your exact model and serial number.