Victron MultiPlus / Quattro / MultiPlus-II / EasySolar-II (VE.Bus inverter/charger)
Victron VE.Bus Error 17: Phase master missing
Quick answerVictron VE.Bus Error 17 means Shown on slaves when communication with the phase-master timed out. Only occurs with multiple devices per phase..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
Shown on slaves when communication with the phase-master timed out. Only occurs with multiple devices per phase.
Likely causes
- VE.Bus cabling issue
- Blown DC fuse on a unit
- Outdated firmware/Assistants
What to check
- Check network cable sockets and replace cables if needed
- Check DC fuses on all units
- Update inverter/charger firmware, Assistants, and GX device firmware
Parts implicated
VE.Bus cablingDC fusefirmware
Sources (verbatim):
- https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes (vendor_kb, retrieved 2026-11-21) § Error 17 - Phase master missing
“Error 17 shows on slaves (only).”
Paraphrased; verify against the manual for your exact model and serial number.