Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
Victron MultiPlus / Quattro / MultiPlus-II / EasySolar-II (VE.Bus inverter/charger)

Victron VE.Bus Error 18: AC over-voltage on switched-off slave output

confidence: verifiedchecked 2026-11-21
Quick answerVictron VE.Bus Error 18 means AC voltage is present on a slave's AC output while it is switched off; there can never be voltage there, so the AC wires are likely swapped..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

AC voltage is present on a slave's AC output while it is switched off; there can never be voltage there, so the AC wires are likely swapped.

Likely causes

  • AC wires swapped by accident

What to check

  1. Check the AC wiring for swapped connections

Parts implicated

AC wiring
Sources (verbatim):
  • https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes (vendor_kb, retrieved 2026-11-21) § Error 18 - AC Over-voltage on the output of a slave while switched off
    “Solution: check if AC wires are not swapped by accident. There can never be voltage on the AC out when a unit is switched off. Recovery: system remains off until restarted.”

Paraphrased; verify against the manual for your exact model and serial number.