Qualified installer only. High-voltage, grid-tied and battery systems can kill. Do not open energised DC/AC equipment. Read the safety model.
Victron MultiPlus / Quattro / MultiPlus-II / EasySolar-II (VE.Bus inverter/charger)

Victron VE.Bus Error 19: Slave does not have AC input

confidence: verifiedchecked 2026-11-21
Quick answerVictron VE.Bus Error 19 means A synchronised slave has no AC input (e.g. a generator is only connected to one unit)..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.

What it means

A synchronised slave has no AC input (e.g. a generator is only connected to one unit).

Likely causes

  • AC input only connected to one of the synchronised inverter/chargers

What to check

  1. Connect AC input to all units, or disable 'Switch as Group' in VE.Bus System Configurator (not possible in ESS)

Parts implicated

AC-in wiring
Sources (verbatim):

Paraphrased; verify against the manual for your exact model and serial number.