Victron MultiPlus / Quattro / MultiPlus-II / EasySolar-II (VE.Bus inverter/charger)
Victron VE.Bus Error 5: Overvoltage on AC out
Quick answerVictron VE.Bus Error 5 means Overvoltage on the AC output, typically because a slave unit's AC wiring is not connected properly or at all..
Qualified installer only. This fault touches the AC grid connection, battery bank, DC bus, or an internal power stage. Isolate and verify de-energised, then escalate to a qualified installer/electrician.
What it means
Overvoltage on the AC output, typically because a slave unit's AC wiring is not connected properly or at all.
Likely causes
- Slave AC wiring not connected properly or missing
What to check
- Check the AC wiring of the slave units
Parts implicated
AC-out wiring
Sources (verbatim):
- https://www.victronenergy.com/live/ve.bus:ve.bus_error_codes (vendor_kb, retrieved 2026-11-21) § Error 5 - Overvoltage on AC out
“This problem can occur when the AC wiring of one of the slave units is not connected properly, or not connected at all. Check the AC wiring. Recovery: auto-restart once the error is gone.”
Paraphrased; verify against the manual for your exact model and serial number.